Art Journal

Nature Ramblings ~ Past Times Time Travel ~ Romancing Daily Life

Saturday, February 28, 2015

Experimenting: Singleton Button Making - Learning Precision

Most of my recreation time right now is going into my Moulage/French Pattern Drafting class. I don't have a lot to blog about in that regards this week, because there's a lot of repetition in my homework. I'm working on creating a sloper this week, but it looks an awful lot like the moulage!
~ ~ ~
For a little fun between muslin sewing and pattern drafting, I've been playing around, learning to create Singleton Buttons.

These are my attempts at Singleton Buttons to date.
Since I'm not yet there when it comes to getting a clean, precise edge, I'm not yet concerning myself with creating the thread shanks with which I would fasten them to a garment.

Clockwise from top left
The button with more yellow flowers has a piece of thin fused quilt batting, cut the same size as the full pattern
The pink flower has no interfacing
The purple flower has a piece of paper, cut about the same dimensions as the metal ring
I've mentioned many times that I'm working on learning to be more precise.Playing with creating my own Singleton Buttons, looks like a good way to get some practice in. There's something about the way I need to learn to hold things and work with the needle when it comes to getting that precise edge I'm after.

My favorite so far, is the top left button. I used a thin piece of quilt batting in that one.

Next, I'll experiment with rings of a slightly larger diameter. I think that might make those tight, precise, edges more achievable.

~ Basic Techniques~
- I made a pattern circle, 2 and a half times the diameter of the metal ring.  I scored some welded metal rings at my local hardware store. I'm sure you could buy something at a fabric store that's actually intended for this purpose.
I've tried different kinds of inside bits.
In this attempt, I simply used a piece of paper.
That wouldn't actually wash well ,but I wanted to see how the edge worked.

 - Then I ran a basting stitch about 1/8 inch away from the edge of my circle, tightened it up, and stitched back and forth to cover the edges.


- The 'X' on the front of this button was basting stitches, to hold that piece of interfacing paper in place

- After I stitched the back closed, I stitched around the inside edge of the metal ring.

- At this point, in the future,  I'll stitch up a thread shank -  I'll be doing that once I'm happier with the way the buttons are starting to look.

2 comments:

Please sign at least your first name, even if you are leaving an anonymous comment :-)

I'm sure everyone will be polite!

Followers