Time Portal: Sunset From Oz

Hail Yellow Brick Road!

Helping Me Recall Stories

And See My Dreams Come True

Fitting in the Sleeve Sloper (Pattern Work)

First I made my moulage.

Then I made my sloper.

They looked a lot alike, so I only blogged about my moulage. Here are the most recent details I wrote about that Lynda Maynard class in this posting.

(http://www.meencantacoser.blogspot.com/2015/02/french-pattern-draftingmoulage-first.html)

We've been working on getting a sleeve to fit into our slopers for two classes now. And I'm continuing to work at that fit and pattern drafting task at home. 

This is not the most attractive garment I've ever sewn!
It's a sloper, which is the equivalent of my moulage plus wearing ease.
Yes, I know I've got too much ease in my sleeve at this point
After I made more change at home, and before I went back to creating
a new version of the pattern, I did the math -
The total distance around the sleeve stitching line for the
armscye/sleeve cap, should be 3/4 of an inch
larger than the distance for the front and back arm holes.

Can you see the work that went into my first shot at drafting a sleeve pattern?
I also write small to do lists on the pattern piece and use a lot of color coding and
 dating to remind myself of what I did in class versus at home, etc.
This is the follow on to the drafting block by the way.
I re-scooped the front, flattening it and giving it less curve, added to the height at
the top center to get the bicep balance line to come out parallel to the floor,
and also added 3/8 of an inch to both the long underarm seam lines.

After making all those changes, I definitely needed a new version of my pattern!
After I made this, I traced out a new sleeve to cut out and sew to try on the other side
of my muslin sloper.

Still To Do 

before class

Next - I'll be stay stitching my second muslin sleeve, cutting it out, basting the balance lines, completing the underarm seam line, and basting in the ease lines.

Then I need to go back to my sloper and alter my side seams to be 5/8 of an inch farther into the seam allowance. I have 1 plus inch seam allowances.

Must remember to note that change on my sloper pattern! Good thing I haven't cut out my most recent version of that pattern, so I can draw that in and use my eraser and still have a clean final working copy.

Entonces I 'll attach the sleeve to the other side of my sloper, making sure my front is attached to the front part of my sloper fit garment, of course!

At that point I'll check all the balance lines in the mirror and see if I need to alter any thing else obvious before I return to class next week. I included a slightly over 1" seam allowance when I drew the pattern markings on, so I can make some alterations.

I create a new version of all my patterns every week after class. That way I have a record of where I've been and what I've done. I can go back to a previous version too. Also it's just less confusing and it motivates me to write more notes on my patterns.

I also include my name, date, phone number and email (I've smudged those out in these photo)

on every single pattern piece and muslin garment. 

In sewing lab, everybody's stuff looks the same and it's a lot of work down the drain 

if I misplace anything.

~ ~ ~

It's not exciting or glamorous working on creating a perfect-fit-me garment, but it sure leads to a lot of daydreaming about what I'll work on once I have the patterns that result from this process.

And that's the kind of thing that keeps me ....

Enchanted by Sewing!

   ]

Fitting in the Sleeve Sloper (Pattern Work)

First I made my moulage.

Then I made my sloper.

They looked a lot alike, so I only blogged about my moulage. Here are the most recent details I wrote about that Lynda Maynard class in this posting.

(http://www.meencantacoser.blogspot.com/2015/02/french-pattern-draftingmoulage-first.html)

We've been working on getting a sleeve to fit into our slopers for two classes now. And I'm continuing to work at that fit and pattern drafting task at home. 

This is not the most attractive garment I've ever sewn!
It's a sloper, which is the equivalent of my moulage plus wearing ease.
Yes, I know I've got too much ease in my sleeve at this point
After I made more change at home, and before I went back to creating
a new version of the pattern, I did the math -
The total distance around the sleeve stitching line for the
armscye/sleeve cap, should be 3/4 of an inch
larger than the distance for the front and back arm holes.

Can you see the work that went into my first shot at drafting a sleeve pattern?
I also write small to do lists on the pattern piece and use a lot of color coding and
 dating to remind myself of what I did in class versus at home, etc.
This is the follow on to the drafting block by the way.
I re-scooped the front, flattening it and giving it less curve, added to the height at
the top center to get the bicep balance line to come out parallel to the floor,
and also added 3/8 of an inch to both the long underarm seam lines.

After making all those changes, I definitely needed a new version of my pattern!
After I made this, I traced out a new sleeve to cut out and sew to try on the other side
of my muslin sloper.

Still To Do 

before class

Next - I'll be stay stitching my second muslin sleeve, cutting it out, basting the balance lines, completing the underarm seam line, and basting in the ease lines.

Then I need to go back to my sloper and alter my side seams to be 5/8 of an inch farther into the seam allowance. I have 1 plus inch seam allowances.

Must remember to note that change on my sloper pattern! Good thing I haven't cut out my most recent version of that pattern, so I can draw that in and use my eraser and still have a clean final working copy.

Entonces I 'll attach the sleeve to the other side of my sloper, making sure my front is attached to the front part of my sloper fit garment, of course!

At that point I'll check all the balance lines in the mirror and see if I need to alter any thing else obvious before I return to class next week. I included a slightly over 1" seam allowance when I drew the pattern markings on, so I can make some alterations.

I create a new version of all my patterns every week after class. That way I have a record of where I've been and what I've done. I can go back to a previous version too. Also it's just less confusing and it motivates me to write more notes on my patterns.

I also include my name, date, phone number and email (I've smudged those out in these photo)

on every single pattern piece and muslin garment. 

In sewing lab, everybody's stuff looks the same and it's a lot of work down the drain 

if I misplace anything.

~ ~ ~

It's not exciting or glamorous working on creating a perfect-fit-me garment, but it sure leads to a lot of daydreaming about what I'll work on once I have the patterns that result from this process.

And that's the kind of thing that keeps me ....

Enchanted by Sewing!

March'ing Through the De Anza Flea Market - Bay Area Field Trip

Directions and More - De Anza Flea Market

Some Junk is Better

Than the Goop I Already Have.

Shall We Hunt For Fleas?

Grandmother Ruby's Dance Dress

What inspired you to sew this dance dress back in 1940, Grandmother Ruby?

Where did you get the fabric? Could it have been silk taffeta? Was this before fabric rationing?

How long did it take you to fit and sew the pattern?

Did anybody in the family help you to make up the beautiful blue dress?

Who did you dance with when you wore it?

Did you wear the dress many times after this? Did anybody else in the family wear it?

Did you ever make the dress over into another garment?

What's the story, Grandmother Ruby?

Experimenting: Singleton Button Making - Learning Precision

Most of my recreation time right now is going into my Moulage/French Pattern Drafting class. I don't have a lot to blog about in that regards this week, because there's a lot of repetition in my homework. I'm working on creating a sloper this week, but it looks an awful lot like the moulage!

~ ~ ~

For a little fun between muslin sewing and pattern drafting, I've been playing around, learning to create Singleton Buttons.

These are my attempts at Singleton Buttons to date.

Since I'm not yet there when it comes to getting a clean, precise edge, I'm not yet concerning myself with creating the thread shanks with which I would fasten them to a garment.

Clockwise from top left
The button with more yellow flowers has a piece of thin fused quilt batting, cut the same size as the full pattern
The pink flower has no interfacing
The purple flower has a piece of paper, cut about the same dimensions as the metal ring

I've mentioned many times that I'm working on learning to be more precise.Playing with creating my own Singleton Buttons, looks like a good way to get some practice in. There's something about the way I need to learn to hold things and work with the needle when it comes to getting that precise edge I'm after.

My favorite so far, is the top left button. I used a thin piece of quilt batting in that one.

Next, I'll experiment with rings of a slightly larger diameter. I think that might make those tight, precise, edges more achievable.

~ Basic Techniques~

- I made a pattern circle, 2 and a half times the diameter of the metal ring.  I scored some welded metal rings at my local hardware store. I'm sure you could buy something at a fabric store that's actually intended for this purpose.

I've tried different kinds of inside bits.
In this attempt, I simply used a piece of paper.
That wouldn't actually wash well ,but I wanted to see how the edge worked.

 - Then I ran a basting stitch about 1/8 inch away from the edge of my circle, tightened it up, and stitched back and forth to cover the edges.

- The 'X' on the front of this button was basting stitches, to hold that piece of interfacing paper in place

- After I stitched the back closed, I stitched around the inside edge of the metal ring.

- At this point, in the future,  I'll stitch up a thread shank -  I'll be doing that once I'm happier with the way the buttons are starting to look.

First Signs of Spring in Atherton

Before I moved to the San Francisco Bay Area, I associated magnolias with the American South. Magnolias grow and bloom like crazy around here too, they love the mild Mediterranean climate. I especially enjoy these blossoms every year, when they pop up in front of the tiny Atherton Library.